Clarity Alto Guia Del Usuario página 11

10 . TONE button:
a . During a call: press the TONE button to toggle between the preset tone set-
tings on your unit, and choose the best setting for your needs . There are five
preset tone settings available on your unit, ranging from emphasizing low
frequencies to emphasizing high frequencies; the settings are specifically de-
signed to ensure the best audio experience during your phone calls . One of the
tone settings is recommended for Hearing Aid users, as it provides superior au-
dio performance while taking the presence of the device into account . The tone
setting is displayed on the screen during the time you are toggling the different
settings .
i . Press and hold the TONE button to enter the Custom mode, allowing for fine-
tuning of the incoming voice . See section Boost Function – Amplifying in-
coming sounds .
b . During idle mode: press the TONE button to toggle between the available ringer
tone settings . There are six ringer tones to choose from, which cover a variety of
tonalities, to ensure that you will always hear the ring of an incoming call .
11 . VOLUME wheel
a . During a call: scroll the volume wheel to turn the volume of the incoming call up
or down . As you raise the volume, you will notice that the BOOST button light
turns on when you transition into Boost On mode .
b . During idle mode: scroll the volume wheel to turn the ringer volume up or down .
The ringer will sound during this mode .
12 . Visual ringer lights: there are four lights that turn on (in a flashing pattern) when
the phone rings . Additionally, these lights indicate different functions (if the fea-
tures are enabled – listed below from left to right under the visual ringer lens):
a . Missed Call light: turns on when you have the MISSED CALL switch set to ON
and there have been at least one unanswered incoming call .
b . Voicemail light: turns on when you have the VOICEMAIL switch set to ON and
there is a voicemail waiting to be retrieved (separate service, purchased from
your phone service provider) .
c . OSA light: turns on when the OSA (Outgoing Speech Amplification) function is
enabled .
d . Low Battery light: turns on when your backup batteries need to be replaced .
ALTO FEATURE LIST
11