Introduction; Intended Use; Features; Package Contents - Parkside PDFP 500 C3 Traducción Del Manual De Instrucciones Original

AIR PAINT SPRAY GUN
PDFP 500 C3

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner.

Intended use

This compressed air-powered appliance is
designed solely for the application/spraying of
solvent-based and water-soluble paints, glazes,
foundation, clear varnishes, vehicle paints, stains,
wood preservatives, pesticides, oils and disinfect-
ants. The appliance is not suitable for working
with emulsions or latex paints, lye, acidic coatings,
granular and gritty spray materials or spray- or
drip-resistant materials. Any other usage of or
modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This
appliance is intended for domestic use only.
Symbols on the compressed air tool
WARNING!
Read the operating instructions before
use.
Always wear safety goggles.
Always wear a mask.
Always wear hearing protection.
Always wear protective gloves.
│ GB │ MT
■ 32

Features

Venting
Flow cup lid
Flow cup
Stroke limiter screw (paint flow-rate control)
Control for round/broad jet
Compressed-air connection
Airflow control
Trigger
Nozzle head
Needle
Spring
Brush
Filter
Screw thread (flow cup)

Package contents

1 air paint spray gun PDFP 500 C3
1 flow cup
1 flow cup lid
1 cleaning brush
1 filter
1 set of operating instructions

Technical details

Max. working pressure
Nozzle size
Flow cup
Recommended viscosity
Noise emission value
Noise measurement value determined in accord-
ance with EN 14462. The rated noise level at the
working location is typically as follows:
Sound pressure level
Uncertainty
3 bar
Ø 1.4 mm
approx. 500 ml
18–23 DIN/Sec.
L = 76.1 dB(A)
pA
K = 2.5 dB
pA
PDFP 500 C3