Publicidad
N
K
x 6
x 12
FIG. 8A
PARALLEL
K
K
FIG. 8C
FIG. 8B
8. Using #8 x 5/8" Pan Head Screws (K), center and attach a 90-Degree Brace (M) flush to each end of
the Long Base (A) and Short Base (B), as shown in FIGURE 8A.
Next, place the base assembly underneath the lower shelf so that the 90-Degree Braces (M) are
against the backs. Also, the edges of the bases should be parallel to the edges of the bottom shelf.
See FIGURE 8B. Use #8 x 5/8" Pan Head Screws (K) to attach the 90-Degree Braces (M) in place.
Attach the base assembly to bottom shelf by using #8 x 1¼" Pan Head Screws (N) through the six
mounting holes in the long and short bases. See FIGURE 8C.
798W — Page 7
Publicidad
