Camera Menu - PNI HUNTING 480C Manual De Usuario

Camera Menu

Note: Default settings of the camera are marked in red.
Photo/Video/PIC+Video
PIC+Video/Video ON
FHD-1080P/HD-720P/WVCA
Testing the picture sending function
(only after successfully adding the camera to the TrailCam Ace application;
please read on page 7)
To perform this test, when in SETUP mode, press the OK key twice to send
an image to the application. This operation can take between 35-45 seconds,
depending on the strength of the GSM signal. The message "Send successful"
should appear on the screen.
Cam
Cam ID
OFF/ON
Cam Mode
Flash LED
All/Part
Image size
8MP/12MP/24MP
Night Mode
Balanced
Min. Blur
Max Range
Multi-shot
IP/2P/3P/4P/5P
Video Size
Video Length
05~59sec.
PIR
PIR Switch
OFF/ON
Sensitivity
High/Middle/Low
Delay
OFF/ON
Time Lapse
OFF/ON
Timer 1
OFF/ON
Timer 2
OFF/ON (6 digits)
OFF/ON
Software/Module
Ver:/IMEI:/MCU:
11
Other
Language
English...
Stamp
OFF/ON
Battery Type
Alkaline/NI-MH
Frequency
50Hz/60Hz
SD Cycle
OFF/ON
Password
Reset
Yes/No
FW update
About
MOD:
QR Code
User manual