AVM Fritz!Power Serie Manual De Instalación Y Operación página 8

FRITZ!Powerline Adapter: Status Display
The FRITZ!Powerline adapter LEDs indicate the following:
on
fl ashes
fl ashing
(every 15 seconds)
off
on
off
on
off
14
FRITZ!Powerline has electrical power
FRITZ!Powerline is restarting or confi guring
security settings
FRITZ!Powerline is on standby
FRITZ!Powerline has no electrical power
The LAN port is in use
No LAN cable is connected or the device on the
LAN cable is switched off
FRITZ!Powerline is connected with the powerline
network and sending or receiving data
FRITZ!Powerline did not detect any compatible
powerline devices or did not detect any devices
that use the same network key
Security and Handling
 Operate the FRITZ!Powerline adapters in a dry place that is free of dust and protected
from direct sunlight and provide for suffi cient ventilation.
 The FRITZ!Powerline adapters are intended for indoor use only. Never let liquids get
inside the FRITZ!Powerline adapters.
 No FRITZ!Powerline adapters can be plugged together.
 Do not open the housings of the FRITZ!Powerline adapters. The devices contain hazard-
ous components and should only be opened by authorized repair technicians.
 To clean the FRITZ!Powerline, disconnect it from the electrical mains and wipe it with a
damp cloth.
CE Declaration
FRITZ!Powerline 530E satisfi es the essential requirements of the improved EMC Directive
2004/108/EC (Electromagnetic Compatibility), the Low Voltage Directive (LVD) 2006/95/EC
(Electrical Equipment Designed for Use within Certain Voltage Limits), as well as the EU Directive
2009/125/EC (Ecodesign Requirements for Energy-related Products) and the 2011/65/EU
(RoHS Directive: on the restriction of the use of certain hazardous substances in electrical and
electronic equipment). The CE symbol confi rms that FRITZ!Powerline 530E conforms with the
above mentioned regulations. The comprehensive declaration of CE conformity is included in the
manual (PDF) in the Internet under: avm.de/en/service/manuals.
15