Assembly - Home Decorators Collection 258-81-35 Guía De Uso Y Cuidado

Assembly

1
Preparing the side panels
□ Lay the left side panel (F) face down on a flat surface. Insert
six small connectors (BB) into predrilled holes and secure with
screws (AA). Repeat using the right side panel (G). Lay one
upper side panel (N) face down on a flat surface. Insert three
long connectors (CC) into predrilled holes and secure with
screws (AA). Repeat using the second upper side panel (N).
F
N x2
3
Assembling the upper panels
□ Lay the left side panel (F) on a flat surface. Insert three
dowels (DD) into predrilled holes in the edge of the left
side panel (F). Slip the left lower front panel (H) over
the dowels (DD) as shown and secure with screws (AA).
Repeat using the right side panel (G) and the right lower
front panel (J). Lay both upper side panels (N) on a flat
surface. Insert two dowels (DD) into predrilled holes in
the end of the upper side panels (N). Slip the upper front
panels (P) over dowels (DD) and secure with screws (AA).
H
P x2
DD
AA
BB
G
AA
CC
AA
DD
F
J
G
N x2
AA
2
Preparing the upper panels and rail
□ Lay the left lower front panel (H), the right lower front
panel (J), both upper front panels (P), and the front
rail (M) face down on a flat surface. Insert two short
connectors (BB) into the two predrilled holes in each
panel. Secure using screws (AA).
H
P x2
4
Attaching the front rail
□ With the right side panel (G) and the left side panel (F)
assemblies standing upright, insert dowels (DD) into
predrilled holes in the ends of the front rail (M). Slip the
front rail (M) into predrilled holes in the edge of the right
side panel (G) and the left side panel (F) as shown.
G
6
AA
BB
J
M
DD
M
F