Assembly - Bissell PROHEAT 1799 Serie Guia Del Usuario

Assembly

WARNING
Do not plug in your machine until you are familiar with all instructions
and operating procedures.
Your deep cleaner comes in 5
easy-to-assemble components.
-Upper Handle
-4 Screws Taped to Handle
-Deep Cleaner Base
-Tool Caddy
-2 Hex Nuts
1
First, slide the Upper Handle on to the base.
3
1
1- Place Hex Nut into back of Tool Caddy and hold in
place. Insert bolt from the front to the back, turning the
bolt into the Hex Nut until snug. Do not overtighten.
Repeat for the second bolt and Hex Nut.
6
www.BISSELL.com
The only tool you will need to assemble
your deep cleaner is a Phillips-head
screwdriver.
2
1-From the flat side of the Tool Caddy,
feed the power cord through the
rounded-rectangle opening.
2-Next, align the Tool Caddy with the Upper
Handle holes.
2
2-Insert 2 screws into
lower 2 holes located
just above the Lower
Hose Rack. Turn the
screws until tightened.
1 2
4
Attach tools to the end of
the hose or front of the
Upper Handle. Wrap the
power cord and hose.