How To Hang Your Ceiling Fan - Fanimation ROTATION FP8018 Serie Manual De Usuario

How to Assemble Your Ceiling Fan (continued)
5. Cut off excess lead wire approximately 6 to 9
inches above top of the downrod. Strip insulation
1/2 inch from the end of each lead off wire. (Figure 6)
NOTE: All set screws must be checked, and retightened
where necessary, before installation.
▲WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging. (Figure 1)
If you are not sure if the outlet box is grounded,
NOTE:
contact a licensed electrician for advise, as it must be
grounded for safe operation.
1. Remove the two screws from the canopy and retain
the screws for " Installing the Canopy Housing "
Step 1. (Figure 2)
▲WARNING
The fan must be hung with at least 10´ of clearance from
floor to blade and MUST ONLY be hung in a vertical
downward position from ceiling. (Figure 3)
CAUTION
To Reduce the Risk of Personal Injury, this Product Must
be Secured as Described in the Manual.

How to Hang Your Ceiling Fan

Ceiling
WARNING:
Do NOT Mount Fan
On Wall Or Floor!
8
Figure 6
MAIN FUSE BOX
Figure 1
Ceiling Canopy
Figure 2
2.5 ft min.
from
staircase
or wall
No
less than
10 ft
Floor
Figure 3