Downrod Mounting - Commercial Electric 50232161 Guía De Uso Y Cuidado

downrod Mounting

1
Removing the power supply box
□ Remove the four screws that attach the power supply box to the LED fixture body (A) using the power tool hex bit (FF).
□ Put the screws aside as they will be needed to reattach the power supply box to the fixture body (A) in a later step.
□ Lift the power supply box from the fixture body (A) and unplug the Quick Connect wires.
Power Supply Box
2
Preparing the power supply box for mounting
□ Remove the center knock-out on the power supply box.
□ Attach one hook from each of the two cable sets (BB) to the hanging holes on the power supply box.
□ Close the open hooks attached to the power supply box with pliers. Do not close the open S hooks at the bottoms of the
cable sets.
Power Supply Box
Hanging Holes
FF
Center Knock-out Hole
BB
Power Supply Box
A
Hanging
Holes
11
A
Power Supply Box
Please contact 1-877-527-0313 for further assistance.
Quick
Connect
HoMEDEPoT.CoM