Temporary Custom Slideshow - Pandigital PI8004W01 Guia Del Usuario

4. Use ▲ / ▼ to highlight the photo to be un-assigned, and then select
the file by pressing '+' (or '-' to un-select).
5. Continue until you have selected all desired photos.
6. Press MENU.
7. Use ▲ / ▼ to highlight Un-assign Photos from This Folder and
then press ENTER.
8. Select Selected Photos to un-assign only those photos you selected
in step 4, or select All to un-assign every photo in the folder.
Note: Un-assigning photos from a folder will not delete them from the
internal memory.

Temporary Custom Slideshow

A temporary custom slideshow is comprised of individual photos you select
and display immediately without saving them in a category folder.
Note: You must use your remote control to create a temporary custom
slideshow.
1.
On the HOME screen, use ◄ / ► to highlight PHOTOS, and then
press ENTER. The photo thumbnails screen will be displayed.
2.
Use ▲ / ▼ ◄ / ► to scroll through the photos. Press "+" to select
photos or "-" to de-select them.
3.
A check mark is displayed in the upper-right corner of the selected
photos. Continue until you have selected all desired photos.
4.
Press MENU.
5.
Use ▲ / ▼ ◄ / ► to highlight Start Slideshow, press ENTER, and
then press ENTER to select Slideshow Selected.
The slideshow will display only those photos you selected.
6.
Press EXIT twice to return to the thumbnails screen. You can select
and/or de-select more photos if desired by repeating steps 2-3 above.
7.
Press EXIT again to return to the HOME screen.
26