Craftmade Ellington RVF52ABZ5 Guia De Instalacion página 6

5. Fan Assembly. (cont.)
safety cable loop
With the hanging bracket secured to the outlet
wood
box and able to support the fan, you are now
ceiling
ready to hang your fan. Grab the fan firmly with
joist
two hands. Slide downrod through opening in wood screw
and washer
hanging bracket and let hanging ball rest on the
hanging bracket. Turn the hanging ball slot until
screw
it lines up with the hanging bracket tab.
nut
safety cable
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in
hanging bracket tab
serious injury or death.
hanging ball slot
Tip: Seek the help of another person to hold the
canopy
stepladder in place and to help lift the fan up to
you once you are set on the ladder.
Replace vice on safety cable and adjust safety
cable length by loosening screw and nut on the
motor housing
safety cable vice and pulling on the cable.
Adjust slack in cable to a hands length and
secure vice by tightening screw and nut
securely. [Refer to drawing at right.] The loop at
the end of the safety cable should just fit over
the threads on the wood screw. Test safety cable
by pulling on loose end with pliers. If the safety
cable slips, the screw and nut on the vice must be
set tighter.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. Extra cable
slack can be left in ceiling area.
page 5