Getting Started; Connect The Aerial - RuarkAudio R7 mk3 Guia Del Usuario

Getting started

1 Fit remote battery
Gently pull off the magnetic steel base and with the remote
face down, slide the battery (type CR2032) into the slot,
ensuring the flat side marked with + faces up. Replace the
steel base.
Please note that the remote may not work until it is paired with
the main system (see step 6).
EN-8

2 Connect the aerial

Fit either the wire or telescopic aerial to the DAB/FM antenna
socket on the back of your R7 and gently tighten it using
the supplied spanner. Use the aerial that works best for you
although for best reception we highly recommend using an
external, professionally installed, aerial.
3 Connect to AC mains
Plug the mains power cord into the mains power socket on the
back of your music system and then plug it into an AC mains
outlet.
4 Switch on
Switch the mains power switch on the back of your music
system to the ON position. Your R7 is now in standby.
To turn your R7 on, press STANDBY on the controls on the
cabinet and the R7 logo will appear on the screen.