Installation With Rca; Supplying Power To The Unit; Installation Of The Ir Dongle - Alcad STB-020 Manual

Installation with RCA

Plug in the STB-020 to the TV with the RCA cable as shown. Connect also the unit to the LAN network
using the RJ-45 port available.
100-240
AC/DC ADAPTER

Supplying power to the unit

Plug in the unit to the electrical mains with the AC/DC adapter provided. See drawings 2 or 3.

Installation of the IR Dongle

In case the unit is installed in a hidden place, it is necessary to install an IRD-010 Dongle to control the
STB. This dongle is able to interact with the TV. Please use the adhesive that is incorporated in order to
stick the IR receiver to the TV. See drawing 4
24 - STB-020 Web Configuration Manual
TV
WHITE
RED
YELLOW
STB-020
Fig.3 - RCA Instalattion
Fig.4 - IR dongle installation
AUDIO IN VIDEO IN
L R
RED
WHITE
CAS-010
IGMP
YELLOW
Floor distributor
ESP
ENG ENG ENG