Metra Electronics 95-5820 Instrucciones De Instalación página 3

6. Unclip and remove the hazard/
airbag switch assembly from the
factory radio trim panel. (Figure E)
7. Unclip and remove the cigarette
lighter socket from the radio trim
panel. (Figure F)
8. Remove (4) Torx screws securing
the factory climate control to the
radio trim panel. (Figure G)
9. Remove (4) 9/32" screws to
remove the factory radio.
Continue to kit preparation
Dash Disassembly 95-5820
All Vehicles
(Figure E)
Factory radio trim panel, Rear view
FACTORY RADIO TRIM PANEL-REAR VIEW
(Figure G)
(Figure F)
3