Axis S1032 Guia De Instalacion página 11

AXIS S1032/AXIS S1048 Installation Guide
First install the AXIS S1032/S1048 recorder. Then install AXIS S9001 and start AXIS Camera Station
Client. From AXIS S9001, log in to the AXIS Camera Station Server installed in the
AXIS S1032/S1048 recorder.
It is not recommended to use AXIS S1032/S1048 for accessing video. The preinstalled AXIS Camera
Station Client is intended for initial configuration and not for active use.
Specifications AXIS S1032/AXIS S1048
Note:
The following specifications are only those required by law to ship with your system. For a
complete and current listing of the specifications for your system, go to
www.axis.com/support
Power:
AC Power Supply (per power supply)
Wattage
Heat dissipation
Voltage
Note:
This system is also
designed to be con-
nected to IT power
systems with a phase
to phase voltage not
exceeding 230 V
Battery
Coin-cell battery
Note:
Heat dissipation is calculated by using the power supply wattage rating.
AXIS S1032
350 W
1356 BTU/hr maximum
100–240 V AC, autoranging,
50/60 Hz
3 V CR2032 Lithium coin cell
AXIS S1048
495 W
1908 BTU/hr maximum
100–240 VAC, autoranging,
50/60 Hz
3 V CR2032 Lithium coin cell
Page 11