TROUBLESHOOTING
If you have any questions regarding the product, please call our customer service
at 1-888-3KOBALT, 8:00 a.m. - 8:00 p.m., EST, Monday - Friday.
PROBLEM
Tool not
working at all.
Tool spins slow.
Cannot get air
out of tank.
WARRANTY
This tool is warranted by the manufacturer to the original purchaser from the original purchase
date for three (3) years subject to the warranty coverage described herein.
This tool is warranted to the original user to be free from defect in material and workmanship.
If you believe that a tool is defective, return the tool, with proper proof of purchase to the point of
purchase. If it is determined that the tool is defective and covered by this warranty, the distributor
will replace the tool or refund the purchase price.
This warranty is void if: defects in materials or workmanship or damages result from repairs
or alterations which have been made or attempted by others or the unauthorized use of
nonconforming parts; the damage is due to normal wear, damage is due to abuse (including
overloading of the tool beyond capacity), improper maintenance, neglect or accident; or the
damage is due to the use of the tool after partial failure or use with improper accessories or
have other rights that vary from state to state.
For warranty questions, call our customer service department at 1-888-3KOBALT,
8:00 a.m.-8:00 p.m. EST, Monday-Friday.
POSSIBLE CAUSE
Air leaking at connection.
Air compressor
pressure insufficient.
1. Low tank pressure.
2. Hose shutoff valve
closed.
3. Air chuck damaged.
CORRECTIVE ACTION
Ensure that all hoses have been
inserted properly.
Purchase air compressor with a
capacity above 10 gallons.
1. Tank pressure must exceed tire
pressure. Increase tank pressure.
2. Turn discharge control wheel
counterclockwise to fully open.
3. Replace hose/air tire chuck
assembly.
KOBALT and the K Design are registered
trademarks of LF, LLC. All Rights Reserved.
12
Printed in China
®
®
kobalttools.com