Operating Instructions - Kobalt SGY-AIR211 Manual Del Usuario

OPERATING INSTRUCTIONS

Connecting to the air compressor
CAUTION: MAKE SURE THAT YOU FOLLOW STEPS 1 THROUGH 4 PROPERLY. If these steps
are not followed, the additional safety devices supplied may not work properly. Consult your local
hardware retailer for further assistance.
1. Connect the 1/4 inch female industrial plug (A) with the quick
coupling outlet of the air tank (not included) (See Figure 3).
2. Screw the check valve (B) into the 1/4 inch female industrial
plug (A). Tighten turning clockwise (See Figure 4).
3. Insert the air tubing (M) into the check valve (B)
(See Figure 5).
3
4
5
Going into fitting
8
A
Clockwise
B
kobalttools.com