Set Up And Operation; Maintenance; Lubrication; Storage - Shop-Vac 405 Serie Manual Del Usuario

DANGER
like that tend to produce arcs or sparks that can cause an explosion. Do not pick up flammable,
combustible, or hot materials. Do not use around explosive liquids or vapors, as electrical devices
produce arcs or sparks which can cause a fire or explosion - do not use at filling stations or
anywhere gasoline is stored or dispensed.
warning
do not expose to rain — store indoors.
1. Inspect power cord for loose or
damaged wiring. If repairs are necessary
contact Shop-Vac Corporation for
assistance.
2. Connect cord to a 2 or 3 wire polarized
extension cord.
3. The cable restraint is designed to hold
a loop of your extension cord. This
helps to avoid the plug and socket
connections from coming loose if the
cable is pulled accidentally
(Figure 8).
4. Disengage stand. To disengage, keep hands and feet away from stand and tilt unit forward until stand
disengages (Figure 9).
5. The Indoor/Outdoor Vac has a powerful motor. It can pick up some objects which may damage the
impeller. Avoid rocks or hardware (screws, nuts, etc.) when possible.
6. NEVER OPERATE ON A WET SURFACE.
WARNING
TO SERVICE OR REMOVE ANY COMPONENTS.
Do not attempt to service your vacuum beyond that described in the user manual. For all other servicing,
follow instructions under Warranty Section.
emptying bag
The collection bag can be easily emptied by removing the strap connection from the upper handle. Next,
disconnect the collection bag from the discharge port by twisting slightly. note: When removing collection
bag tilt opening up to prevent contents from spilling out. Make sure exhaust gasket stays in discharge port of
vac. Unzip collection bag and empty debris into a suitable container.
note: Make sure exhaust gasket is in place before reattaching collection bag.
No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
Empty collection bag and unplug units cord from extension cord before storing. Store indoors; do not
expose to rain.
Do not attempt to service your vacuum cleaner beyond that described in this manual. Refer all other
servicing to a qualified service center.
PAGE 6

SET UP AND OPERATION

–
This equipment incorporates parts such as switches, motors or the
– to avoid electric shock, do not use on wet surFaces —

MAINTENANCE

–
BE SURE TO DISCONNECT POWER SUPPLY BEFORE ATTEMPTING

LUBRICATION

STORAGE

SERVICE

Figure 8
Figure 9