To Safely Attach The Product For Transport; To Tow The Product - Husqvarna R 316TX Manual De Usuario

To safely attach the product for transport

Before you attach the product, you must read and
understand the safety chapter. Refer to
on page 11 .
WARNING: The parking brake is not
sufficient to lock the product during
transport. Attach the product tightly to the
load area.
Equipment: 2 approved straps and 4 wedge shaped
wheel blocks.
1. Park the product in the center of the load area.
CAUTION: For transport in transport
vehicles with a cover. Make sure to let
the product become cool before you put
the product under the cover.
2. Make sure that the center of gravity of the product is
above the wheel axle of the transport vehicle. If a
trailer is used for transport, make sure that the down
force on your tow bar is correct.
3. Apply the parking brake.
4. If the product has Bluetooth
Husqvarna Connect.
5. Lower the cutting deck to the mow position.
6. Remove all loose objects.
844 - 007 -
Transport safety
®
, lock the product with
7. Assemble the first strap through the rear
transmission frame. Refer to the illustration.
8. Tighten the strap rearward to attach the product to
the load area.
9. Put the second strap around the frame tunnel.
10. Attach the strap to the load area.
11. Tighten the strap in the direction of the front of the
load area to attach the product to the load area.
12. Put the wheel blocks in front of and behind the rear
wheels.

To tow the product

The product has a hydrostatic transmission. To prevent
damage to the transmission, tow the product short
distances only and at low speed.
Disengage the transmission before you tow the product.
To engage and disengage the drive system on
Refer to
page 15 .
Storage
Prepare the product for storage at the end of the
season, and before more than 30 days of storage. If you
31