Unpacking; Assembly; Operation - Shop-Vac AM Serie Manual De Usuario

IF YOU ARE IN DOUBT AS TO WHETHER THE
OUTLET IS PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED WITH THE
APPLIANCE – IF IT WILL NOT FIT THE OUTLET,
HAVE A PROPER OUTLET INSTALLED BY A
qUALIFIED ELECTRICIAN.
This appliance is for use on a nominal 120-volt circuit,
and has a grounded plug that looks like the plug
illustrated in SKETCH A. A temporary adapter that looks
like the adapter illustrated in SKETCHES B and C may
be used to connect this plug to a 2-pole receptacle as
shown in SKETCH B if a properly grounded outlet is not
available. The temporary adapter should be used only
until a properly grounded outlet (SKETCH A) can be
installed by a qualified electrician. The green colored
rigid ear, lug or the like extending from the adapter
must be connected to a permanent ground such as
a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal
screw.
SKETCH B
IN CANADA, THE USE OF A TEMPORARY ADAPTOR
IS NOT PERMITTED BY THE CANADIAN ELECTRICAL
CODE. Make sure that the appliance is connected to
an outlet having the same configuration as the plug. No
adapter should be used with this appliance.

UNpACKING

Unpack air mover from carton. Lift unit by using the top
carry handle only.
PAGE 4

ASSEMBLY

TRANSpORT HANDLE
INSTALLATION
FIGURE 1
FIGURE 2
SKETCH A
FIGURE 3

OpERATION

TO REDUCE THE RISk OF FIRE OR ELECTRIC
SKETCH C
SHOCk, DO NOT USE THIS AIR MOVER WITH ANY
SOLID-STATE SPEED CONTROL DEVICE.
4. Follow these instructions to operate your air mover:
5. Lift unit by using the top carry handle only.
6. For easy mobility, your unit comes with an adjustable
transport handle and wheels. Always make sure the
handle is locked into place before using. Do not use
transport handle and wheels when going up or down
stairs.
FIGURE 4
1. With rear of unit facing you, take
handle and position it with flat
side facing rear of unit.
FIGURE 1
2. Align holes in handle with holes in
rear of unit.
3. Secure with screws provided.
FIGURE 3
WARNING!
7. To change transport handle to
the highest height, press button
on top of transport handle.
FIGURE 4
.
FIGURE 2
.
.
.