Remote Control - Danby DAC060EE1WDB Manual Del Propietário

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. Power button: used to turn the air conditioner on and
off.
2. Cool button: press to activate cool mode.
3. Up and down buttons: used to set the desired
temperature or the timer function.
4. Sleep button: in sleep mode the air conditioner will
automatically adjust the temperature and fan speed. The
set temperature will raise every 30-60 minutes and at
most will change 6 times until the set temperature is 81
or 82 degrees.
5. Timer button: press the timer button to set the timer.
• Set timer on: with the air conditioner off, press the
timer button and use the up and down arrows to set
the desired temperature. Press the timer button again
and use the up and down arrows to set the amount
of time before the air conditioner turns on. Press the
timer button again to start the countdown.
• Set timer off: with the air conditioner on, press the
timer button and use the up and down arrows to
set the amount of time before the air conditioner
turns off. Press the timer button again to start the
countdown.
• The timer can be set from 0.5 - 24 hours. The up
and down buttons will change the timer in 0.5 hour
increments below 10 hours and in 1 hours increments
above 10 hours.
6. Auto mode button: in auto mode the air conditioner
automatically choose the mode of operation (cool, dry or
fan) based on ambient conditions.
7. Fan speed: press the fan speed button to set the fan
speed. In cool mode the fan can be set to high, medium,
low or auto. In fan mode the fan can be set to high,
medium or low.
8. Display button: press the display button to turn all lights
on the display on or off.
9. Eco mode button: this mode can be used to save
electricity. In eco mode, the air conditioner will turn off
once the desired temperature is reached and will not turn
on again until the temperature in the room exceeds the
set temperature. While in eco mode the fan may turn on
periodically for a few seconds to take an accurate.
10. Fan only button: used to run the fan only.
TEMPERATURE SCALE
1. To change the temperature scale between Fahrenheit and
Celsius, fi rst turn off the unit, unplug it and wait for 2
minutes before plugging it back in.
2. Turn on the unit and set it to cool mode and medium fan
speed at a temperature of 30°C (86°F).
3. Press the display button on the remote control 8 times
within 8 seconds. The unit will beep and the temperature
scale will change.
10