Technical Specifications - Lenco DIR-60 Manual Del Usuario

Adjust the volume of the Radio (and, if necessary, the audio source device) as required.
11. Using the Headphone output
Insert the Headphones 3.5mm jack plug into the Headphone input on the rear panel.
Adjust the volume level as desired using the Volume control.

12. Technical Specifications

Network
Streaming
Supported filetypes
Connections
Input
Output
Power consumption
Power consumption (standby)
Operating Temperature
Operating position
Power supply adaptor: (For EU only)
Manufacturer: Shenzhen Adition Audio Science and Technology Co., Ltd
Model Number: AD0600501000EU
Use only original AC adaptor
Use only the power supply listed in the user instructions.
Dim. unit
Weight
13. Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way,
the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of
the manufacturer will be voided.
14. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly from your particular
situation. All items described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from the description made in
this manual.
802.11b/g/n (WLAN) Encryption: WEP, WPA, WPA 2(PSK), WPS
UPnP, DLNA
WMA, MP3,
DC, 3.5mm AUX-IN, 3.5mm headphone out
100-240V~50/60 Hz, 0.2A max
5V/1A
5W
<1W
0°C-35°C
Horizontal
180 x 61 x 109 mm (WxDxH)
304g
14