Fan Operation - Premium PFF2020P Manual De Instrucciones

USAGE:
FAN OPERATION: Always operate the fan in the upright position following all instructions
and recommendations listed in this manual. FAN CONNECTION Plug fan directly into
120 Volt A.C. ,60 Hz wall outlet. Be sure plug fits lightly in outlet. A loose connection may
cause overheating and damage to the plug or fan. NOTE: To prevent overloading a other
electrical needs.
FAN LOCATION: Place the fan in the area of the room that will provide proper fan cooling.
This fan can be placed in a window to provide additional air from outside. It is the
responsibility of the user to be sure the fan does not fall out the window. It is
recommended that window screens be left in place.
ASSEMBLY INSTRUCTIONS: Simple assembly is required to use this fan on a table or
floor. Snap legs to fan cradle (Fig. 1). Short side of base leg should face the front of the
fan, long side should face the back of the fan (the side with the speed control). See Fig. 2.
TURNING FAN ON/OFF: To start the fan, turn rotary ON/OFF dial on Control Panel to
desired speed setting.
0-Off
1-Low
2-Medium
3-High
Rotate ON/OFF dial to 0~OFF to discontinue use. Unplug fan when not in use.
FAN TILT: This fan can tilt 180°to direct airflow for maximum comfort. Grasp the fan body
and tilt fan to desired angle. Ratchet action will keep the fan at the selected angle. Do not
forces fan around cradle past 180°.