NARDA SignalShark 3330 Instrucciones De Manejo Y Seguridad página 76

Mounting on a mast or pole
Fig. 14: Mounting on a mast or pole
 The two assembled U brackets and U profiles have been mounted to the
Outdoor Unit.
 The threaded rods have been pre-assembled on the U profiles.
1. Position the toothed cut-out of the U profiles on the Outdoor Unit against
the mounting structure (mast/pole).
2. Place the two other U profiles onto the threaded rods on the rear side
and slide the U profiles against the mounting structure as tightly as
possible.
3. Secure the connection for each threaded rod using a plain washer, a
spring washer and a hexagon nut.
4. Lock each joint using a second nut and tighten.
76 SignalShark 3330 Outdoor Unit
Narda