Carton Contents - KNOVA KN M-2509RC Manual Del Usuario

CARTON CONTENTS

UNPACKING YOUR MITER SAW
WARNING
To avoid injury from unexpected
starting or electrical shock, do not plug the power
cord into a source of power during unpacking and
assembly. This cord must remain unplugged
whenever you are working on the saw.
1. Remove the miter saw from the carton.
IMPORTANT: Do not lift miter saw by the trigger switch
handle. It may cause misalignment. Lift machine by the
hand holds for transportation.
Miter handle hardware bag
Dust bag
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing material. Check each
of the illustrations shown below to make certain all items
are accounted for, before discarding any packing material.
WARNING
attempt to assemble the miter saw, or plug in the
power cord until the missing or damaged part is correctly
replaced. To avoid electric shock, use only identical
replacement parts when servicing double insulated tools.
Call 01-800-70-KNOVA (56682) for replacement parts.
Miter saw
Operator's manual
6
If any part is missing or damaged, do not
Hold-down clamp
Blade wrench