Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
REPLACE FILL VALVE SEAL
A:
Remove cap (see page 13).
*
B:
Replace seal with a
genuine
Fluidmaster 242 Seal.
C:
Replace valve cap.
• Place cap assembly on top of gray
valve body by aligning cap arm and
adjustment rod next to refill tube.
• Press down on top cap while
rotating top & arm clockwise to
locked position.
*
Always use genuine Fluidmaster parts when installing or repairing. Fluidmaster will not be
responsible or liable for use of non-Fluidmaster parts during installation or repair.
WATER LEVEL IN BOWL IS TOO LOW
A:
WATER FROM REFILL TUBE MUST
FLOW THROUGH OVERFLOW PIPE
Make sure the refill tube is supplying
water down overflow pipe.
B:
WATER LEVEL IN TANK MAY BE
TOO LOW
1/2" below top of overflow pipe is
recommended (see page 10).
14
Refill Tube
Overflow
Pipe
1/2"
Overflow
Pipe
ADDITIONAL QUESTIONS?
For installation assistance, contact our
technical services department.
EMAIL, CHAT
or
our toll-free number.
www.fluidmaster.com/support
1-800-631-2011
Hours Available:
Monday – Friday
5:30 AM - 5:00 PM PST
CALL
15
Publicidad
