Bimar PA100 Manual De Instrucciones página 17

 If there is a fault or the appliance is not working correctly, switch it off and have it
checked by a qualified professional. Repairs done by an unqualified person can be
dangerous and cause the guarantee to become void.
 The appliance comes with the following controls and accessories:
- " " button: press to turn the appliance on and off
- Normal mode: "SPEED" button: it operates the 3 speeds and the automatic
function. Press the button repeatedly and the indicator corresponding to the
selected speed will light up on the display
1= minimum speed
2= medium speed
3= maximum speed
AUTO-1= Automatic mode
Automatic mode: the appliance is equipped with a sensor to monitor air quality.
The purifier in this mode automatically adjusts the colour that corresponds to the
air quality and the speed. The three levels are indicated as follows:
Colour of
according to air quality
Blue
Orange
Red
- Sleep mode: it is activated by pressing the "ION" and "SPEED" buttons together.
The appliance will run at setting speed and only the "SLEEP" indicator light will
appear; to restore normal function (deactivate sleep mode), repeat operations in
reverse.
- "Timer" button: sets the running time, after which the unit will stop. Press the
button repeatedly: each time it is pressed the time period changes (from 2h, 4h or
8h) and the selected time will light up on the control panel. To deactivate the
timer, press the button until all times disappear.
- "Ion" button: this function produces a flow of negative ions, which neutralise
positive ions present in the air; this function is activated every time the button is
pressed. The corresponding indicator light lights up on the display.
- UV lamp (4): this sterilization system reduces bacteria and germs; the lamp
purifies the air and can eliminate bad smells caused by smoke or mould or
undesirable animal (pet) odours. It is activated by pressing the button; the
corresponding light lights up on the display.
- HEPA filter (2): filters dust, pollen, smoke and particles from the air that can cause
allergies or illnesses of the respiratory system.
- HEPA filter replacement indicator light: turns on (red) whenever the HEPA filter
needs to be changed. To reset the light, press the "TIMER" and "UV" buttons
indicator Air quality level
Good
Insufficient
Very poor
17/52
Speed
Minimum
Medium
Maximum