Further Troubleshooting - DePuy Synthes Purevue Manual De Instrucciones

Error Code Error
ERROR 0150 Network – Drive full
ERROR 0151 Network – Write failure
ERROR 0152 Network – Failure
ERROR 0158 Internal Hard Drive Full
ERROR 0159 Failure to start recording
ERROR 0160 Failure to end recording
ERROR 0168 Playback failure
ERROR 0169 Playback failure
6.4

Further Troubleshooting

For problems not remedied by any of the above means, cycle the device power off and on .
If the problem persists, call Customer Service at +1 (800) 382-4682 in the United States or
contact your DePuy Synthes representative . Outside the United States, contact your local
representative .
Possible Solution
Free space on your network drive
Contact your facility's IT support to
troubleshoot . Unable to write to network drive
Unknown failure . Contact your facility's IT
support to troubleshoot
Free space on your hard drive by deleting
archived cases
Try restarting recording or power cycling the
Camera Control System .
Try ending recording again or power cycling
the Camera Control System
Try initiating playback again or power cycle the
Camera Control System
Try initiating playback again or power cycle the
Camera Control System
51