Publicidad
Idiomas disponibles
Idiomas disponibles
Section 4: Operation
For maximum rinsing (higher pressure and bwer
fiow)_ for stubborn or hard to reach surface such
as second story surfaces_ paint removal oil stains_
rust removal or other stubborn
substances (tar,
gum_ grease_ wax, etc.)_ sdect red 0° PrqectPro TM
nozzHe (Figure H 6).
How
to Use the Turbo
Nozzle
The turbo nozzHe rotates the high pressure stream in a
rapid circular pattern.Always
start the turbo nozzle at a
distance_ gradually getting closer to the surface until you
get the cleaning force you want.
CAUTION
2_
Always make sure the surface you will clean w,iHnot be
damagedby the high pressure spray by testing in a hidden area.
Pull back collar on quick-connect
and pull current
ProjectPro TM nozzle off. Store ProjectPro TM nozzles in
holder provided on the accessory tray.
Pull back on cdlar_ insert turbo nozzle and release
collar (Figure 18).Tug on turbo nozzle to make sure it
is securely in place.
To apply chemical applies project specific cleaners
to help break down stubborn
dirt and grime on a
variety of surfaces,
select
bhck ProiectPro
TM
cleaning detergent
nozzle (Figure
17).
3.
For most effective cleaning, keep turbo
nozzle from 8 to
24 inches away from cleaning surface. If you get turbo
nozzle too dos< you may damage cleaning surface.
NOTE:
Detergent
cannot
be applied
with the turbo
nozzle.
Cleaning
and Applying
Chemical
JMPORTART:
Use soaps designed
spedtkally
for
pressure
washers.
Household
detergents could damage
the pump.
4.
Pull back
on cdlan
insert
selected
ProiectPro
TM nozzle
and release
cdhr.Tug
on ProjectPro
TM nozzle
to make
sure
it is securely
in place.
5.
For most
effective
cleaning,
keep
ProjectPro
TM nozzle
from
8 to 24 inches
away from
cleaning
surface.
If you
get
the
nozzle
too
dos<
you
may damage
the
cleaning
surface.
6.
DO
NOT
get
closer
than
6 inches
when
cleaning
tires.
• Starting
the engine without
all the hoses
connected
and
without
the water
turned
ON will damage
the pump.
Damage
to equipment
resulting
from
failure to follow
this
instruction
will void warranty.
To apply
detergene
follow
these
seeps:
I.
Review ProiectPro
TMnozzle use.
2.
Prepare
detergent
solution
as required
by
manufacturer.
Publicidad
