Publicidad
Idiomas disponibles
Idiomas disponibles
SPECmFmCATmONS
_ax
outmet
Pressure
.....................
")200
psi
Max [::mowRate
..........
2.2 gallons per minute (gpm)
Detergent
Use detergentapproved forpressurewashers
Water
Suppmy
................
Not to Exceed IO0°F
Automatic
coom
.............
Will cycle when water
Down
System
reaches 125°° 155°F
Shipping
Weight
...........................
54 Ibs.
GENERAL
HAmNTENANCE
RECOHHENDATmONS
The pressure washer warranty
does not cover items that
have been subjected to operator
abuse or negligence.To
recove
full value from the warranty,
the operator
must
maintain
the pressure
washer
as instructed
in this manual.
NOTE:
Should you have questions
about
replacing
components
on your TroyoBilt pressure
washer, please call
1=888-611=6708
for assistance.
o Some adjustments
will need to be made periodically
to
properly maintain your pressure washer.
o All maintenance in this manual and the engine owner's
manual should be made at least once each season.
o Once a year you should clean or replace the spark plug,
clean or replace the air filter and check the spray gun and
nozzle extension assemblyfor wear.A new spark plug and
clean air filter assure proper fuebair mixture and help your
engine run better and last longer. Please refer to your
engine owner's manual for more details.
o If equipped with inflatable tires, keep the air pressure at
the value marked
on the tire or within
I S and 40 psi.
Before
Each Use
° Check engine oil level.
o Check water inlet screen for damage.
o Check in=line filter for damage.
o Check high pressure hose for leaks.
o Check chemical injection
hose and filter for damage.
° Check spray gun and nozzle extension assembly for
leaks.
o Rinse out garden hose to flush out debris.
PRESSURE
WASHER
MAmNTENANCE
Check
and Clean
InletScreen
Examine the screen on the pump's water inlet. Clean it if
the screen is clogged or replace it if screen is damaged,
Check
High
Pressure
Hose
The high pressure hose can develop leaks from wear,
kinking, or abuse. Inspect the hose each time before using
it. Check for cuts, leaks, abrasions or bulging of cover,
damage or movement
of couplings. If any of these
conditions exist, replace the hose immediately.
WARNING
NEVER repair high pressure hose. Replace it,
Replacement
hose rating NUST exceed maximum
pressure
rating of unit.
Check
Chemical
lniection
Hose
Examine the filter on the detergent tube and clean if
clogged.The tube should fit tightly on the barbed fitting.
Examine the tube for leaks or tears. Replace the filter or
tube if either
is damaged.
Check
Gun and Nozzle Extension
Examine the hose connection
to the spray gun and make
sure it is secure.Test the trigger by pressing it and making
sure it "springs back" into place when you release it. Put
the trigger lock in the ON position and test the trigger.
You should not be able to press the trigger.
Check
In-Line
Filter
Refer to Figure 19 and service the in-line filter if it
becomes clogged, as follows:
Nozzle Extension
O:ring
Publicidad
