Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
iMPORTANT:
Read entire owner's manuaH beforeyou
attempt to assemble or operate your new pressure washer.
Remove
Pressure Washer
From
H.
Remove
the parts
bag, accessoNes,
and inserts
incHuded
with
pressure
washer.
2.
SHice two
corners
at the end of carton
from
top to
bottom
so the paneH can be folded
down
fiat.
3.
Remove
pressure
washer
from
carton.
Carton
Contents
items
in the carton
include:
Hain Unit
Handle
High Pressure Hose
Spray Gun
NozzHe Extension with Quick Connect Fitting
PHasticAccessory Tray
Safety Goggles
OH Bottle
Turbo Nozzle with Quick Connect
Parts Bag (whch
incHudes the following):
Owner's
HanuaH
Engine HanuaH
Owner's
Registration Card
Bag containing 4 muHti-coHored ProjectPro TM
NozzHes
HandHe/Tray Fastening Hardware
Kit (which
includes):
Carriage Bolts (:2)
"L" BoHt
PHastic Knobs (3)
Tree CHips (4)
PREPARING
PRESSURE
WASHER
FOR USE
If you have any probHems with the assembHy of your
pressure washer or if parts are missing or damaged, call the
pressure washer heHpHine at J=888=6 [ J =67@8. [f caHHing f or
assistance, pHeasehave the model revision, and seriaH
number from the data tag available.
To prepare
your
pressure
washer
for
operation,
you
will
need
to
perform
these
tasks:
H.
Firthout and send in registration
card.
:2.
Attach
handHe to main unit, then
attach
accessory
tray
to handHe.
3.
Add
oiH to engine
crankcase.
4.
Add
fueH to fueH tank.
S.
Connect
high pressure
hose to spray gun and pump.
6.
Connect
water
suppHy to pump.
7.
Attach
nozzHe extension
to spray gun.
8.
SeHecdattach
quick
connect
ProjectPro
TM nozzHe to
nozzHe extension.
Attach
Handle
and Accessory
Tray
H,
Place handle onto handle supports connected to main
unit. Hake sure holes in handle aHignwith holes on
handle supports (Figure H).
Handle
Supports
NOTE:
It may be necessary to move the handHe supports
from side to side in order to aHignthe handHe so it wiHHsHide
over the handHe supports.
0
Publicidad
