Publicidad
Idiomas disponibles
Idiomas disponibles
5: The default time zone is Pacific Time. If the clocks sets itself and
the hours are off, hold the correct time zone button for 5 seconds
to correct.
•
Indoor: Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions, microwaves,
routers, baby monitors, etc., which can prevent signal reception.
•
Position near an exterior wall that faces Ft. Collins, Colorado for
WWVB time signal reception.
•
The antenna is available for signal reception when the front or back
of the clock faces Colorado.
•
Outdoor: Choose a location with an overhang to protect the clock
from the overhead sun or standing snow or rain.
•
A shaded location will prevent inaccurate temperature readings.
Mount the clock on a wall with the hanging hole on the back of the
clock. Be sure the battery cover is on snug.
On rare occasions in certain areas, the clock may not be able to receive
the radio controlled time signal due to the strength of the signal or the
geographic location.
In this case, the clock can be set manually and used as a regular quartz
wall clock.
3 Battery
Compartments
Note: Allow up to five nights for the clock to receive the WWVB signal
before manually setting the time.
Model: BBB87740x1 www.lacrossetechnology.com/support
Position Clock
Manual Set Time
Time Set Tab
Time Zone Buttons
Daylight Saving
Time Indicator
Page | 2
Publicidad
