Charging The Battery - Wayscral TAKEAWAY E-200 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 132
B. To check the correct height of the seat, sit with your legs straight
and your heel resting on the pedal (fig. B). When pedalling, your
knee will be slightly bent once the foot is in the low position
(fig. A).
WARNING: In the case of a seat with springs, it is
important to fit a cover onto the seat springs if a child seat
is installed in order to prevent any risks of fingers
becoming trapped.
Adjusting the handlebars using the clamping lever
Both the height and tilt of your bicycle handlebars can be adjusted.

4. Charging the battery

Before handling the battery, the "Battery" and "Charger" sections
of this user guide must be read to avoid any damage. The bicycle
battery must be charged before the power assistance can be used. To
do this, plug the charger pack plug into a 220 V electrical outlet and
connect the charging cable to the battery socket (23), located at the
rear of the bike, under a protective cover. On the top of the battery, the
charge indicator shows you the battery charge level. Press the indicator
57
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido