Attaching The Cover Strips - Thermador T18 Serie Instrucciones De Instalación

8. Insert the inner cover.
Place one side of the inner cover in the gap between
metal and plastic. Then press the other side panel
inwards to place it in the gap.
Note:
The marking must point towards the button holes.
9. Remove protective film from the double-sided
adhesive tape.
10. Slide in the cover frame and push firmly.
11. Insert the water collecting tray.

Attaching the cover strips

(for wine storage cupboard only)
1. If the frame width is narrow, the cover strip side
piece may have to be shortened. To determine the
required length of the side piece, test pieces are
enclosed with the cover strip.
2. Push cover strips on the longitudinal side into the
gap between the door panel (a) and glass pane (b).
33