NORTH STATES 4934 Instrucciones página 4

3. ADJUST THE LOWER GATE MOUNT TO FIT
DIFFERENT THICKNESS OF MOLDING (0-25mm)
* If you do not have molding, SKIP to "securing gate panels".
FIGURE 3A
Loosen the screw.
FIGURE 3D
Push the press button and place on the upper wall mount and lower gate
mount will automatically adjust.
4. SECURING GATE PANELS
FIGURE 3B
Adjust the lower gate mount to meet
the lower wall mount.
FIGURE 3C
Place the pin of lower gate mount
into the lower wall mount first.
FIGURE 3E
Tighten the screw.
FIGURE 4
Rotate both removable vertical
bars counterclockwise until they
are tight.
Note: Release by turning the
removable vertical bar clockwise
prior to folding or moving the gate.
Page 4