Getting Started; Mudguards; Wheels - Mima kobi Manual De Usuario Y Garantía

1
3 + 4

GETTING STARTED

MUDGUARDS

• Please note the L/R indication on the chassis and on
each mudguard.
1. Attach mudguards
Slide the mudguard down onto the oval-shaped
protrusion on the side of the chassis. Push down the
bottom lip until it clicks in place.
2
2. Remove mudguards
Pull up the bottom lip of the mudguard and slide it up and
free from the round-shaped protrusion.

WHEELS

• Please note the L/R indication on the chassis and on
each wheel.
3. Attach rear wheels
Press in the wheel axle hub and insert the axle into the
wheel fitting.
Check if the wheels are properly attached by attempting
to pull them out again.
4. Remove rear wheels
Press in the wheel axle hub and pull out the wheel.
5 + 6
5. Attach front wheels
Insert the wheel rod into the wheel fitting and push in
until it clicks.
6. Front wheel swivel lock
Use the front wheel swivel lock when you are using
on rough terrain.
Push down the swivel lock button to activate.
Pull it up again to deactivate.
7. Remove front wheels
Press the unlock button and pull out the front wheel.
7
ENG
kobi
5