Cleaning And Maintenance; Storing The Windbreak; Troubleshooting - Dometic AIR BREAK Pro 3/5 Instrucciones De Montaje

Cleaning and maintenance

A
NOTICE! Material damage
• Do not use sharp or hard objects or
cleaning agents for cleaning.
• Do not use alcohol based materials,
chemicals, soap and detergents for
cleaning.
• Remove bird droppings and tree
resin as soon as possible to avoid
permanent damage to the material
1. If necessary, clean the product with clean
water and a soft brush.
2. Apply impregnation against water and UV
radiation before each trip.

Storing the windbreak

I
NOTE
• Fully set up the windbreak for
cleaning.
• Choose a sunny day for cleaning to
ensure the material will dry thoroughly.
1. Clean the windbreak.
2. Air fully and ensure the windbreak is totally dry
before packing away.
3. Store in a well ventilated dry place.

Troubleshooting

I
NOTE
A fully equipped spare parts kit should
include:
• waterproofer
• repair tape and repair solution
• silicone spray for the zippers
• spare pegs
Problem
Windbreak only
inflates with
difficulties
8
Solution
➤ Check that the valve is fully
screwed into the air pole.
➤ Check if the inflation tube is
twisted at the valve.This may
be indicated by noise.
Untwist the inflation tube.
➤ Check that the hand pump
is working.
Problem
Air poles are kinked ➤ Add more air
Air leak
Rip in the fabric
Disposal
➤Place the packaging material in the appropriate
recycling waste bins, wherever possible.
M
If you wish to finally dispose of the product,
ask your local recycling center or specialist
dealer for details about how to do this in
accordance with the applicable disposal
regulations.
Warranty
The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
dometic.com/dealer) or your retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
The warranty covers manufacturing defects, mate-
rials and parts. The warranty does not cover fading
of the cover and wear and tear due to UV radiation,
misuse, accidental damage, storm damage, or
permanent, semi-permanent* or commercial use.
It does not cover any resulting damage. Please
contact your dealer for claims. This does not affect
your statutory rights.
* All-Season models have been designed for use
on seasonal pitches.
4445103328
Solution
(9 psi/0.62 bar).
➤ Check that the valve is fully
screwed into the air pole
and the ring seal is in place.
➤ Check that the cap of the
valve is done up tightly.
➤ Use repair tape to seal the
fabric.
➤ Have repairs carried out by
an authorized specialist.