Lubrication; Lubrication Schedule - Husqvarna V554 Manual Del Operador

LUBRICATION

Lubrication Schedule

12/12 Every year
1/52 Every Week
1/365 Every day
General
Remove the ignition key to prevent accidental
movements during lubrication.
When lubricating with an oil can, it must be
filled with engine oil. When lubricating with
grease, unless otherwise stated, use high grade
molybdenum disulphide grease.
For daily use, the machine must be lubricated
twice weekly.
Wipe away excess grease after lubrication It
is important to avoid getting lubricant on the
belts or the drive surfaces on the belt pulleys.
If this happens, clean them with spirits. If the
belt continues to slip after cleaning, it must be
replaced. Gasoline or other petroleum products
must not be used to clean belts.
*
Hydraulic oil and filter change at 1000
hours, and at least once each year.
See additional information below.
p Change engine oil every 50 hours.
Lubricate with grease gun
Filter change
Oil change
Level check
Hydraulic Oil Changes
If Parker™ HT-1000 is used continually, the oil
and filters must be changed every 1,000 hours.
Other recommended fluids are:
Castrol™ Syntec 5w-50
Amsoil™ AW ISO 68
Shell™ TTF-SB
and require fluid and filter changes every 500
hours after the first 1000 hour change.
All other brands of fluids require changes every
250 hours after the first 1000 hour change.
27