Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
16.1 Preparatory Activities
16.1.1 Checking the delivery content
Check the machine immediately after delivery for transport damage, missing parts and loose
screw connections. Report any damage or missing parts immediately to your dealer or freight
forwarder. Visible transport damage must be noted immediately on the delivery note in
accordance with the warranty provisions, otherwise the goods are deemed to have been properly
taken over.
16.1.2 Selecting a suitable installation location
Choose a suitable place for the machine.
Pay attention to the safety requirements and the dimensions of the machine.
The selected location must ensure a suitable connection to the electrical supply as well as
the possibility of connection to an extraction system.
Make sure that the floor can support the load of the machine.
The machine must be levelled simultaneously at all support points.
It is also necessary to guarantee a distance of at least 0.8 m around the machine.
In front of and behind the machine, the necessary distance must be provided for the
feeding of long workpieces.
16.2 Assembly of the Parts Dismantled for Transport
The machine is pre-assembled. The parts that have been disassembled for transport must be
assembled before use. Follow the instructions below:
After assembly, fasten the planer thicknessing machine to the floor with screws.
HOLZMANN MASCHINEN GmbH
1.
www.holzmann-maschinen.at
NOTE
Assembly socket
Mount the red socket elements (1) between the
grey elements.
You need six screws and washers (2) for each
element.
Mount the connecting element between the front
and rear castor bracket (5).
Attach the front and rear castor bracket to the
socket and fasten them with two screws (6) at
each corner.
Place the socket with the castors on the floor.
Make sure that the castors are folded up and
adjust the foot height (7) if necessary.
ASSEMBLY
40
HOB 260ABS
Publicidad
Tabla de contenido
