Introduction; Expected Service Life - Joerns Healthcare Oxford Switch Manual De Instrucciones

English

1. Introduction

The Oxford Switch is a sit-to-stand and transfer device for moving a person over short distances.
This might be bed to chair, chair to wheelchair or to and from a toilet/commode, for example. As
a secondary application, the Switch can also be used to help reposition a patient who may have
slouched in their chair. The Switch has a very compact footprint, enabling effective use, even
in confined spaces. It can also be quickly disassembled into two separate components to aid
transportation and storage.
The packing consists of a strong, purpose built carton that is used for both export and domestic
markets to ensure the safe arrival of the product.
To properly maintain your product please refer to the maintenance schedule included in this
document. If you are at all unsure what your country's servicing requirements are, please check
with your authorised distributor and/or a local government agency.
The CE mark:
Statement of Intended Use
The intended use of the Oxford Switch is to help an individual with limited mobility to stand
(with assistance) from a seated position and to enable their transfer from one resting surface
to another, such as a bed to a chair. It is designed for indoor use and for transfers over short
distances only.

Expected Service Life

Oxford Professional products are designed and tested for a minimum service life of ten (10)
years, subject to the use and maintenance procedures stated in this manual. Use, other than in
accordance with these instructions, may compromise service life.
Serious Incident Reporting
In the event of a serious incident taking place during use of this product, affecting the patient and/
or care-giver, it must be reported to the product manufacturer or authorised distributor. Should
the incident take place within the European Union (EU), it must also be reported to the local
competent authority within the member state.
The Oxford Switch carries the CE mark and complies with the following EC
directives:
• Medical Device Directive MDR 2017/745
Oxford
®
Switch
3