KENMORE ELITE 34562 Manual De Uso Y Cuidado página 10

CONVERSION INSTRUCTIONS
Gas Line Conversion
This conversion must be made on all grill models: 5B, 4B and 3B
1. Remove regulator hose from grill by unscrewing it from the "Y connection with flare" fitting. The fitting is on the L-shaped
bracket on the right rear wall of the cart, behind the fuel tank gauge.
2. Insert the natural gas line through the hole in the back of the cart, as shown. Tighten it to the fitting on the L-shaped
bracket where the regulator hose was removed.
From House to Grill
Distance
Up to 25 ft.
26 ft.-50 ft.
51 ft.-100 ft.
3. If desired, the fuel gauge can be removed from the grill by removing the 4 screws that hold it in place.
Quick-disconnect
coupler
4. Coat pipe nipple with gas resistant teflon tape or pipe dope. Tighten quickdisconnect coupler onto pipe nipple that leads to natural gas
supply.
Tubing Size
3/8 in. diameter
1/2 in. diameter
2/3 of run 3/4 in.
1/3 of run 1/2 in.
Natural gas hose
10
Y connection
with flare