Heath Zenith SL-5211 Manual Del Usuario página 3

TEST AND ADJUSTMENT
❒ Turn on the circuit breaker and light switch.
NOTE: Sensor has a 1
will detect motion. When first turned on or when
switching modes wait 1
❒ Turn the SENSITIVITY (SENS) control to the mid position
and the ON-TIME control to the TEST position.
ON-TIME
10 5 1 TEST
Bottom of Sensor
Avoid aiming the control at:
• Objects that change temperature rapidly, such as heating
vents and air conditioners. These heat sources could
cause false triggering.
• Areas where pets or traffic may trigger the control.
• Nearby large, light-colored objects reflecting day may trig-
ger the shut-off feature. Do not point other lights at the sensor.
5 ft.
60 ft.
Maximum Range
The detector is less sensitive to motion directly towards it and
more sensitive to across motion.
Motion
Least Sensitive
595-4238-07
1 / minute warm up period before it
2
1
/ minutes.
2
SENS
MIN
Maximum
Coverage Angle
Motion
Sensor
Most Sensitive
❒ Walk through the coverage area
noting where you are when the
lights turn on. Move the sensor
head up, down, or sideways to
change the coverage area.
❒ Adjust the SENSITIVITY as
needed. Too much sensitivity
may increase false triggering.
❒ Set the amount of TIME you want
the lights to stay on after motion
is detected (1, 5, or 10 minutes).
MAX
Range . . . . . . . . . . . . Up to 60 feet (varies with surrounding
Sensing Angle . . . . . . Up to 110°
Electrical Load . . . . . . 25 to 75 watt Incandescent
Power Requirements
(Lamps off) . . . . . . . . 120 VAC, 60 Hz
Operating Modes . . . . TEST, AUTO and MANUAL OVER-
Time Delay . . . . . . . . 1 , 5, 10 minutes
Sensitivity . . . . . . . . . Adjustable
HeathCo LLC reserves the right to discontinue products and to
change specifications at any time without incurring any obliga-
tion to incorporate new features in products previously sold.
110°
3
SPECIFICATIONS
temperature).
RIDE
Aim Sensor Down
for Short Coverage
Aim Sensor Higher
for Long Coverage