Operation
USING THE DEHUMIDIFIER
1. To start operation, press the power button to the ON position ("-"). A green LED light on the front panel will
illuminate.
2. To stop operation, press the power button to the OFF position ("o").
3. When first using the dehumidifier, operate the unit continuously for 24 hours.
4. If the unit has been switched off and needs to be switched on again quickly, allow approximately three
minutes before restarting.
NOTE: Do not restrict or obstruct the airflow from the air outlet.
USING THE WATER TANK
1
WATER TANK FULL INDICATOR
□
When the water tank is full, the dehumidifier
will automatically stop operation. A red LED
light (A) below the " " will flash.
3
WATER DISPOSAL
□
Pull out the rubber plug (1) and dispose of the
water.
1
2
□
A
4
□
8
WATER TANK REMOVAL
Slowly pull out the water tank (H). Grip the left
and right handles securely, and carefully pull the
water tank out straight to avoid water spillage.
NOTE: After removing the water tank, do not touch any
internal parts of the unit; doing so may cause damage.
REINSTALLATION
Secure the rubber stopper into the water tank (H),
and reinstall the tank into its correct position.
NOTE: The dehumidifier will not operate unless the water
tank is inserted securely.
H
H