Assembly - Weston 86-0501-W Manual Del Usuario

ASSEMBLY

BODY ASSEMBLY
1. Align the Frame wth the
holes in the Base. From below
FIGURE 1
the Base, slide each Base
Washer onto the threaded end
of the Frame. Secure each
Base Washer with a Base Nut
(FIGURE 1).
PLUNGER ASSEMBLY
2. Slide the Plunger Seal onto
the Plunger Release Valve
(FIGURE 2).
3. Insert the piston through
the valve hold. From the top
of the Plunger, place the Acorn
Nut on the threaded end of
the piston. NOTE: The piston
will feel loose in the Pressure
Release Valve KIt.
4. Place the assembled
Plunger Release Valve Kit
onto the end of the Plunger
Shaft (FIGURE 3).
FIGURE 3
FIGURE 2
Plunger
Seal
Pressure
Release
Plunger
Valve Kit
Release
Valve
Valve Hole
6