Craftsman 14926 Manual Del Operador página 4

items needed:
Drawer 4" (Qty: 1)
Drawer 9" (Qty: 1)
Drawer 12" (Qty: 1)
Slide (Qty: 6)
#8-32 x 3/8" Screw (Qty: 12)
#8-32 Keps Nut (Qty: 12)
process:
• Separate slide parts. (See drawer removal instructions.)
workbench Slide
Figure 3
• Attach (2) Drawer Slides to each drawer (c, D, and E)
using (20) #8-32 x 3/8" Screws, and (20) #8-32 Keps
Nuts as shown.
• wrench tighten.
Screw
Figure 3.1
Drawer Slide
Drawer Slide
Drawer
Keps Nut
4
items needed:
#8-32 x 3/8" Self-tapping Screw (Qty: 12)
process:
• Install (6) workbench Slides on workbench frame, as
shown, using (2) #8-32 x 3/8" Self-tapping Screws in
each slide.
workbench top removed for clarity.
workbench Slide
Screw
note: Drawers may be organized in several
configurations, below is the slide positioning
for the recommended drawer configuration.
Figure 4.1
F
R
O
N
T