On-Timer Operation; Sleep Timer + On-Timer Operation - Mitsubishi SRK25ZMP-S Manual Del Propietário

ON-TIMER operation

■ Operation starts 5 to 60 minutes before the set time so that the room temperature reaches the optimum temperature at the set time.
ON-TIMER operation can be set regardless of whether the air-conditioner is running or not.
Changing of set time
Set a new time by using the ON-TIMER button.
How to cancel
Press the CANCEL button to turn off the timer
display.

SLEEP TIMER + ON-TIMER operation

■ Combined timer operation of SLEEP TIMER and ON TIMER.
Changing of set time
Set a new time by using the SLEEP or ON TIMER button.
Example: In the case the preferred room temperature is required at 8:00.
1
Press the ON-TIMER button.
ON TIMER display
2
Press the or
Every time the button is pressed, the display is switched in the order of:
0:00 0:10 0:20
Every time the button is pressed, the display is switched in the order of:
0:00 23:50 23:40 ...
Set at 8:00.
3
Press the ON TIMER button.
The display changes from blinking to steady lighting and the setting is com-
plete.
The timer light (yellow) is on.
The operation stops if it is set during operation.
NOTE
• Operation starts 5 to 60 minutes before the set time.
• The timer light (yellow) goes out at the set time.
• Make sure to press the button within 60 seconds from the last operation in step
2, otherwise the setting is not completed.
• The current time is not displayed during ON-TIMER operation.
Example: When it is required to stop after 3 hours and then start operation at
8:00, near the set temperature.
■ SLEEP TIMER setting
Set by the procedures on page 11.
Set to
■ ON TIMER operation setting
Set by the above procedure mentioned in ON TIMER.
Set to
The setting of the lighting of the timer light (yellow) of this unit is complete.
• After the SLEEP TIMER set time has elapsed, the operation stops, and
it starts from 5 to 60 minutes before the ON TIMER's set time.
• The timer light is turned off when ON TIMER set time comes.
How to cancel
Press the CANCEL button to turn off the timer display.
– 12 –
is blinking.
button.
...
1:00 1:10 (Units of ten minutes)
23:00 22:50 (Units of ten minutes)
h
Page 13