4. Attach the strap (A) in correct position for grass
clearing or forestry clearing.
5. Tighten the hip strap tightly. Make sure that the hip
strap aligns with the hip.
6. Push the 2 parts of the breastplate together as
shown.
7. Attach the side belt to the breastplate.
8. To decrease the pressure on the rib cage and
shoulders, connect the side strap with the strap to
the hip pad. Recommended for women.
Introduction
WARNING:
product, you must read and understand the
safety chapter.
1346 - 004 - 03.06.2021
A
Operation
Before you operate the
9. Tighten the elastic strap (B) to move more load from
the shoulder strap to the hip strap.
B
10. Adjust the shoulder strap to make the product weigh
equally on your shoulders.
11. Adjust the side straps around the rib cage until the
breastplate is aligned with the center of your chest.
12. Adjust the height of the suspension point. Refer to
Correct balance of the product on page 17 . For
forestry clearing, the correct height of the
suspension is approximately 10 cm/4 in below your
hip.
To do before you operate the product
•
Examine the work area. Make sure that you know
the type of terrain, and the slope of the ground.
Examine if there are obstacles such as stones,
branches and ditches.
•
Do an overhaul of the product.
15