Symbols On The Product - Husqvarna 555FX Manual De Usuario

37. Shredder blade (555FRM)
38. Drive disc (555FRM)
39. Cutting attachment guard (555FRM)
40. Transport guard (555FRM)
41. Locknut (555RXT)
42. Support cup (555RXT)
43. Support flange (555RXT)
44. Grass blade (555RXT)
45. Drive disc (555RXT)
46. Cutting attachment guard (555RXT)
47. Transport guard (555FX, 555FXT, 555RXT)
48. Operator's manual
49. Socket wrench
50. Locking pin
51. Carburetor screwdriver
52. Hex key

Symbols on the product

Stop.
WARNING! Be careful and use the
product correctly. This product can cause
serious injury or death to the operator or
others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
The product can cause objects to eject,
which can cause injury.
Keep a minimum distance of 15 m/49 ft to
persons and animals during operation of
the product.
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15
m/49 ft distance to persons and animals
during operation of the product.
4
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Air purge bulb.
Choke.
Idle adjustment screw.
High speed needle.
Low speed needle.
Fuel.
Decompression valve.
Heated handles.
Only use a flexible cutting wire. Do not
use metal cutting attachments. Apply this
for grass guard accessory.
yyyywwxxxx The rating plate shows the
serial number. yyyy is the
production year and ww is
the production week.
1346 - 004 - 03.06.2021