Fig. 2
3. The battery will take approximately 1 hour and 20 minutes
to charge. The battery indicator LEDs will twinkle and
illuminate one by one during the charging process.
Unplug the charger immediately when the 3 LEDs are all
illuminated.
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery
Assembly
m
WARNING!
Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and serious personal injury.
m
WARNING!
To prevent serious personal injury, make
sure the battery is removed, and the blade has come to a
complete stop before inspecting, cleaning, or servicing the
unit.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
product.
Assembling + Fitting the Head
1. With the cultivator + weeder head lock unlocked, insert
the cultivator + weeder head into the end of the pole
assembly until it clicks in place (Fig. 3).
Fig. 3
Battery
Cultivator +
indicators
weeder head
lock
2. Flip up the cultivator + weeder head lock to lock the
cultivator + weeder head in place (Fig. 4).
Fig. 4
Cultivator +
weeder head
lock
Cultivator +
weeder head
m
WARNING!
properly tightened before using the cordless cultivator +
weeder.
9
Pole assembly
Cultivator +
weeder head
Pole assembly
Make sure nuts, screws and locks are