Unpacking; Disposal Of The Packaging; Setup; Setup Location Requirements - Caso TeeGourmet 1800 Manual Del Usuario

13.3 Unpacking

13.4 Disposal of the packaging

13.5 Setup

13.5.1

Setup location requirements:

caso TeeGourmet
To unpack the device, proceed as follows:
x Remove the device out of the carton and remove the packaging
material.
The packaging protects the device against damages during
transit. The packaging materials are selected in accordance
with environmentally compatible and recycling-related points of
view and can therefore be recycled.
Returning the packaging back to the material loop saves raw
materials and reduces the quantities of accumulated waste.
Take any packaging materials that are no longer required to
"Green Dot" recycling collection points for disposal.
If possible, keep the original packaging for the device for the
duration of the guarantee period of the device, in order that
the device can be re-packaged properly in the event of a
guarantee claim.
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfil the following prerequisites:
x The device must be set up on a firm, flat, horizontal surface with
sufficient load-bearing capacity for the teamaker.
x Choose the setup location in such a way that children cannot
reach any hot surfaces on the device.
x Do not set up the device in a hot, wet or extremely damp
environment or near flammable material.
x The electrical socket must be easily accessible so that the
power lead can be disconnected easily, in the case of an
emergency.
x The installation and assembly of this device in non-stationary
setup locations (e.g. on ships) must be carried out by specialist
companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
Please note
Commissioning
39